It is often the case that we have to drill holes in the porcelain stoneware of the walls of the house to put in dowels or to house pipes for the various drains of sinks and washing machines or the pipes of heating systems etc. The problem is that drilling new types of very hard porcelain tile is not so easy. Various sites can be found on the Internet that recommend drilling a small hole in the tile with a hammer and nail and then using the old Widia drill bit to create the hole.
Unfortunately, this system worked with tiles from a few years ago, with porcelain tile, if you try to drill the tile that way, you will only chip the surface and burn the drill bit with the risk of cracking the laid tile as well. Try it to believe it!
The solution for drilling hard porcelain tile is there and has been on the market for a few years, but few people know about it. There are diamond drill or flexible drill bits that working water-cooled or waterless drill through even the hardest tiles with no problem.
You will find many different brands and prices on the market. It is not easy to tell the quality of the tool just by looking at it because there are specific technical features that make a difference. Two seemingly similar diamond cutters can drill 3 holes or 100 holes, it all depends on the quality of the tool and how it is used.
Without further ado, I will point you to a small list in which I indicate the type of cutter needed depending on the work to be done…dowels, sink pipe holes etc. I hope it will be useful to you.
CUTTER DIAMETER USE
5mm
FTJ
o
FAJ
plugs
6mm FTJ or FAJ plugs
8mm FTJ or FAJ plugs
10mm FTJ or FS or FAJ plugs
12mm FTJ or FAJ dowels and door stops
14mm FTJ or FAJ dowels and door stops
15mm FT pipe ¼ dowels, doorstop
20mm
FS
3/8 copper pipe for gas, water (old models)
27mm FS pipe ½ water, faucets, heating
30mm FS pipe ½ water, faucets, heating
35mm FS pipe 1″ iron or PVC for water, gas, industrial
40mm FS pipe ½ water, faucets, heating
45mm
FA
pipe1″ ¼ drain sink,sink,dishwasher
50mm FS/FA pipe1″ ¼ drain sink,sink,dishwasher
55mm FS/FA pipe1″ ¼ drain sink,sink,dishwasher
60mm FS/FA pipe1″ ½ drain for washing machine
65mm FS/FA pipe1″ ½ drain for washing machine
70mm FA pipe2″ ½ dischargeoperator industrial washing machine, swimming pools
75mm FS/FA pipe2″ ½ dischargefor industrial washing machine, swimming pools
100mm FT/FA toilet drain, kitchen air intake and boiler
120mm
FT
/FA 3″ pipe toilet drain, kitchen air intake and boiler
FTJ, FT diamond cutters are tools to be used with a drill, and there is no need for water.
FS diamond cutters are tools for use with the hose/angle grinder, and there is no need for water.
Diamond cutters FA E FAJ, are tools to be used with the drill or the specific equipment called “BimBo drills” and run on water.
If you are remodeling your home, doing minor wall work or are a professional tiler or plumber and have any specific concerns..write to us. We will get back to you within a few hours!
Good work